25.08.2016

We launch the production of new generation conventional beam smoke detector «Arton-DL».

Advantages «Arton-DL1» to «Arton-DL»: 

• Greatly simplified the procedure for calibrating the detector at the installation location. Calibration is performed by pressing the "Test / Calibration" in the receiver unit.
• Simplified the procedure for calibrating the detector at the installation location. Calibration is performed by pressing the "Test / Calibration" in the receiver unit.
• Integrated drift compensation mechanism (including contamination compensation of optical system components). This mechanism automatically adjusts the drawdown threshold of the detector to the factory level during operation.
• The output signal "Fault" is formed by the current decreasing the AL when it detects a complete overlap of the optical channel, in the absence of the connection between the receiver unit and the transmitter unit and when exceeding the limit level of the drift compensation. The signal "Fault" is duplicated by yellow LED flashes on the receiver unit with Fault kinds differentiation.
• New red and yellow LEDs appeared on the receiver unit with the display indication of "Fire", "Fault" modes, including the relative signal indication in the "Test" mode.