The control panel “ARTON-32P” is designed for the organization of centralized and autonomous protection of various objects against fire by the 24-hours control of the status up to 32 fire alarm loops, fixation of signals about beginnings of fire or a fault, generation of alarm notifications (about fire, break-down, fault, unsanctioned breaking) to notification devices (light and sound) and to a desk of centralized supervision. The device forms management signals up to 22 output lines (including switching of management devices of fire-extinguishing, smoke-removal, ‘ventilation systems of an object’).

The control panel “ARTON-32P” conforms to all the norms DSTU EN54-2:2003 and DBN V 2.5-13-98.

The device determines and reflects with optical indicators and on an alphabetic digital display:

• General statuses: “Fire”, “Fault”, “Off”, “Test” modes;
• Notifications about faultss:
  • Switching off the outlet “Fire”;
  • Malfunction of the outlet “Fire”;
  • Transmission of the signal “Fire”;
  • Switching off the outlet “Fault”;
  • Fault of the outlet “Fault”;
  • Transmission of the signal “Fault”;
  • Transmission of the signal “Off”;
  • Transmission of the signal “Test”;
  • Switching-off notification outlets;
  • Fault of notification outlets;
  • Switching-on of notification outlets;
  • Switching-off communication channels with a desk centralized supervision;
  • Fault of communication channels with a centralized supervision desk;
  • System error;
  • Delay of a switch’s activation;
• Statuses of alarm loops:
  • «Standby mode»;
  • «Attention»;
  • «Fire»;
  • «Short-circuit»;
  • «Open-circuit»;
  • «AL off»;
  • «AL testing»;
• Statuses of outlet switches:
  • «Short-circuit at load»;
  • «Open-circuit of load»;
  • «Switching-on delay»;
  • «Activation»;
  • «Off»;
  • «Test»;
• Statuses of a power unit and a storage battery:
  • «No storage battery»;
  • «Charging of storage battery»;
  • «Critical discharge of storage battery»;
  • «Storage battery in the norm»;
  • «220 V» or «No 220 V»;
  • «Fault of charger».

The device is meant for the connection of 2-wire alarm loops. It allows fixing nominal power voltages of AL 15 or 24 V (for a group of 8 AL). The connection to AL of active and passive detectors is permitted as well as the combined connection of these detectors. The device allows to conduct the independent sanctioned switching on/off any of AL, and also the short-term reset of all the alarm loops.

The device provides:

• Protection against the unsanctioned access inside a case (opening or breaking of a cover);
• Automatic charging of a storage battery and the protection against its improper connection;
• Protection of all the output switches against the short-circuit with the automatic renewal of the initial status after elimination of the short-circuit;
• Control of the integrity of the load circuit of all the output switches.

The multilevel access to management functions and the possibility of programming with the help of a built-in keyboard of the following parameters and functions is realized in the device:

• Survey and setting of AL’s parameters;
• Fixation of basic currents of AL (current of AL in the standby mode);
• Setting of character names of AL;
• Survey and setting of parameters of the operation of output switches;
• Setting of character names of output switches;
• Change of consumers’ and an engineer’s passwords;
• Setting of consumer rights on the management of an alarm loop;
• Setting of consumer rights on the management of outlets;
• Management of an event log.