The control panel “ARTON-04P” is designed for the arrangement of centralized and autonomous protection of various objects against fire by the 24-hours control of the status up to 4 fire alarm loops.

The control panel “ARTON-04P” conforms to all the norms of DSTU EN54-2:2003 and DBN V 2.5-13-98.

The control panel “ARTON-04P” controls and reflects with optical indicators alarm statuses (alarm loops): the standby mode, the verification of an alarm loop (if AL is with verification), “Fire”, “Short-circuit”, “Open-circuit”, “AL switched-off”.

The device controls and reflects with optical indictors the following kinds of faults and statuses:

• The short-circuit of output switches;
• The open-circuit of output switches’ loads “Light/Sound”, “Fire” and “Fault”;
• The absence of power voltage of output switches and AL;
• The absence of A.C. mains 220 V;
• The critical discharge or the absence of a storage battery;
• The fault of a charger;
• A system error.

The protection against an unsanctioned access inside a case is provided in the device (opening or breaking of the cover). When opening the cover, a tamper button activates and the device passes to the “Alarm” mode.

The device is meant for the connection of 2- and 4-wire alarm loops. The connection both active and passive detectors is possible as well as the combined connection of detectors.

The device provides:

• Automatic charging of a storage battery and the protection against its improper connection;
• Protection of all the output switches against the short-circuit with automatic restoration of the initial status after the elimination of the short-circuit;
• Multilevel access to management functions.

With the help of a built-in keyboard it is possible to programme the following parameters and functions:

• The survey and determination the type of alarm loop zone (with/without verification);
• Fixation of the basic current of AL;
• Setting of consumer rights for the management of AL;
• Change of consumers’ and an engineer’s passwords;
• Setting of an operational mode of a light-sound detector;
• Setting of activation time of a light-sound detector;
• Setting of a mode and programming of operation logics of additional output switches;
• Reset to factory settings.